Controlled Pig Feed Trough
Controlled Pig Feed Trough, with one-sided.
Controlled Pig Feed Trough, with one-sided.
Controlled Pig Feed Trough, with two-sided.
Controlled Pig Feed Trough, with two-sided.
The equipment presented in this page has been designed, fabricated,
Catalog
-
Specialized and custom industrial equipment
- Valving repair jig
- Valving test bench
- Machine for hole punching in automotive batteries single housing
- Automated painting chamber for flat steel products
- Computerized test bench for electrical centrifugal pumps (NEW!)
- Computerized bench for testing in-tank pump units (NEW!!)
- Fuel pump test stand (NEW!)
- Aspiration system for tableblast machine
- Roller conveyor
- Tilting table
- Roller conveyor machine with tilting device for metal shapes feed
- Vertical roller conveyor machine
- Tumbling barrel
- Sizing screen (shaker)
- Movable screen
- Installation for the curb forming plates
-
Specialized food-processing equipment
- Four-pan oilseed roaster with capacity of 40 tpd
- Shrink wrap packaging machine
- Dough rolling machine
- Tank container for transportation of syrup
- Warmed «Bread van»
- Warm body of the van for the transport of bread on the chassis of the vehicle Mercedes Sprinter 313
- Warm body of the van for the transport of bread on the chassis of the vehicle GAZ 3302
- Insulated 4-door «Bread van» 120 trays!
- Warm body of the van for the transport of bread on the chassis of the vehicle GAZ 3302
- 4-door (96 cases) Refrigerated Van on the chassis of the vehicle GAZ 3302
- New modified arrangement of 5-door insulated Bakery Delivery Van based on Mercedes Sprinter 313 light truck frame
- Insulated Bakery Delivery Van based on Mercedes Sprinter 313 light truck frame
- Хлебный фургон на базе шасси автомобиля Mercedes Sprinter 313
- Warm body of the van for the transport of bread on the chassis of the vehicle GAZ 3302
- Kiosks for coffee and other drinks
- 4-door Bakery Delivery Van with holding capacity of 96 bakery cases
- Insulated Bakery Delivery Van with holding capacity of 120 bakery cases (4-door box) based on GAZ 3302 light truck frame
- 4-door Bakery Delivery Van with holding capacity of 96 bakery cases, based on GAZ 3302 light truck frame
- 4-door Bakery Delivery Van with holding capacity of 96 bakery cases
- Two units of 4-door Bakery Delivery Van
- 4-х дверный хлебный фургон вместимостью 96 лотков на базе шасси автомобиля ГАЗ 3302
- 4-door bread isothermal van on the chassis of the car "Mercedes - Benz Sprinter 313"
- 4-door insulated bread van (96 trays) on the chassis of GAZ-3309
- Metal indoor tipper body (container-grain) under the vehicle's chassis KAMAZ for transportation of grain products and other bulk products
- 4-door bread isothermal van on 96 trays on the chassis of the car "GAZ 3302"
- Isothermal bread van for 96 trays on the chassis of the GAZ 3302
- 4-door bread isothermal van on 96 trays on the chassis of GAZ 3302
- A machine for brewing hops
- 4-door bread isothermal van on 96 trays on the chassis of the car "GAZ 3302"
- 4-door bread isothermal van on 96 trays on the chassis of the car "GAZ 3302"
- 4-х дверный изотермический хлебный фургон на 96 лотков на шасси автомобиля ГАЗ 3302
- 4-х дверный изотермический хлебный фургон (на 120 лотков) на шасси автомобиля ГАЗ 3302
- 4-х дверный изотермический хлебный фургон на 96 лотков, на шасси автомобиля ГАЗ 3302
- "Пароувлажнители" для увлажнения теста при выпечке хлебобулочных изделий
- 4-х дверный изотермический хлебный фургон на 96 лотков на шасси автомобиля ГАЗ 3302
- 4-х дверный, изотермический хлебный фургон, на 96 лотков, на шасси автомобиля ГАЗ 3302
- 5-ти дверный изотермический хлебный фургон на 120 лотков на шасси автомобиля Mercedes Sprinter 313
- 4-х дверный изотермический хлебный фургон на 96 лотков на автошасси ГАЗ 3302
- 5-ти дверный изотермический хлебный фургон на 120 лотков на автошасси Mercedes Sprinter 313
- 4-х дверный хлебный фургон вместимостью 96 лотков на шасси автомобиля ГАЗ 3302 (Газель)
- Изотермический хлебный фургон (4-х дверный, на 120 лотков) на шасси автомобиля ГАЗ 3302
-
Equipment for manufacture and repair of railway wagons
- Freight wagon center sill stamping machine
- Freight wagon center plate stamping machine
- Hydraulic machine for flap hatches stamping
- Fixture for assembly/weld of freight wagon side frame
- Tilting device for open wagon frame
- Open wagon door straightening jig
- Draft gear assembly and dismantling bench
- Open wagon sides straightening frame
- Dolly for draft gear removal
- Open wagon frame assembly/weld fixture
- Testing bench for tank wagon check valve (NEW!)
- Open wagon body assembly stand (NEW!)
- Fixtures
- Jig for cross-bearer girder assembly
- Axle equipment assembly jig
- Axle equipment assembly jig
- Trolley for Dismantling of Rail Car Cushioning Devices
- Fixture for machining of automatic coupler pins
- Fixture for machining edges of the roller opening within rail car automatic coupler elevator system
- Приспособление для обработки кромок отверстия валика подъемника корпуса автосцепки
- Stand mounting and installing dismantling axle unit
- A device for treatment of a stud of the housing coupler. A device for processing edges of the hole of the cushion lift housing coupler
- Press upgrade cold overmolding PHN-1
- Автомат шлифовки роликов ЮПТМ 294.00.000
-
Aviation equipment and aircraft parts
- Components of lifting mechanism for aerial refueling unit
- Engine strut fuel supply lines
- Aerial refueling unit installation gear (NEW!)
- Name of equipment
- Computerized bench testing unit for electrical centrifugal pumps
- Computerized bench for testing in-tank pump units (NEW!!)
- Bench testing unit for fuel pumps
- Heavy equipment transportation dolly
- The pipe (Cone) fuel drive UPAZ
- Container for removable equipment
- The pipe (Cone) fuel drive UPAZ
- Монтажный комплект УПАЗ
- Гидравлическая авиационная стремянка 4Н9912-ОМ
-
Equipment for agriculture
- Double-sided feeder with feed wetting
- Automatic feeder with wetting system
- Controlled Pig Feed Trough
- Feed mixer
- Pig Farrowing Pen
- Piglet Nursery Store
- Hydrants watering DP 56.000
- Партия гидрантов в сборе ДП 56.000, колен присоединительных, патрубков с фланцем
- Double-sided Optimized Adjustable Stock feeders with Stainless Steel Trough
- Auger Conveyor
- Pigsty Feed Rationer Mechanisms
- Upgraded adjustable double-sided trough, with the trough stainless steel
- Система гидроочистки воздуха
- Партия Гидрантов поливочных ДП 56.000
- Партия Гидрантов поливочных ДП 56.000 и колен присоединительных
- Партия Гидрантов поливочных ДП 56.000
- Engineering and process equipment
-
Lifting mechanisms
- Overhaul repair of overhead traveling crane КМ-5000, capacity: 50/10 ton
- Repair of 80 ton Flamingo portal jib crane boom mechanism.
- Heavy equipment transportation dolly
- Capture for lifting wagons
- Grip for transport trolley
- Capital repair of bridge crane 35/5
- Universal lifting traverse
- Extension push bar for trays
-
Steel structures (NEW!)
- Metal framework of LED panel screen
- Fire escape staircase metal structure
- Aspiration system for tableblast machine
- Rack 3-tiered storage shtantsform
- Conveyor roller
- «Boxes» for storage and travel packaging
- «Equalizer» for stacking of packaging and corrugated packaging
- Trays for storage shtantsform
- Trolley for transportation of fuels and lubricants
- Flume to remove getrootnode of automatic line
- Table for restoration of Cutting Blades for Stamp-Out Dies
- Aligner for leveling stacks of corrugated packaging
- Capacity wash
- The potbelly stove
- Drum washing trough, stainless steel
- Cut form washing table
- Rail car unloading trolley
- Trolley with Stainless Steel Containers designed for transportation of glue
- Container mobile
- Mobile module (metal) "Lodge" for accommodation of protection or staff
- Containers for waste, self tipping with cover
- Add-2nd floor for installation of the racks
- Overpass to service road tankers for transporting oil
- The mobile module (metal) "Lodge" for accommodation of protection or other staff
- Table sealing machine
- 2nd stage add-ins 2nd floor for installation of the racks
- The party of "self tipping container with lock"
- "Тележка для брака" и ряд других запасных частей
- Dies and die tooling (NEW!)
-
Transport systems and mechanisms (NEW!)
- Screw conveyor, capacity 120 tph, length: 30 m
- Modernisation of conveyors of the station of unloading of carriages
- Mobile belt conveyor for unloading bulk products
- Mobile hopper with slide gate device for loading belt conveyor
- Vertical Feed Mixer Auger
- Repair conveyor belt mobile, «Simon»
- Конвейер ленточный передвижной "Симон"
- Емкость металлическая для зерновых материалов
- Шнек передвижной
- Services
- Isothermal bread vans
Company News
News archive-
16 May 2018
Изготовлен и смонтирован на автошасси ГАЗ 3302 4-х дверный изотермический хлебный фургон на 120 лотков
Для ООО "Хард Фор", г. Киев изготовлен и смонтирован на шасси автомобиля ГАЗ 3302 4-х дверный изотермический хлебный фургон на 120 лотков.
Products
-
Specialized and custom industrial equipment -
Equipment for manufacture and repair of railway wagons