Company News

Catalog

• Specialized and custom industrial equipment
  • Valving repair jig
  • Valving test bench
  • Machine for hole punching in automotive batteries single housing
  • Automated painting chamber for flat steel products
  • Computerized test bench for electrical centrifugal pumps (NEW!)
  • Computerized bench for testing in-tank pump units (NEW!!)
  • Fuel pump test stand (NEW!)
  • Aspiration system for tableblast machine
  • Roller conveyor
  • Tilting table
  • Roller conveyor machine with tilting device for metal shapes feed
  • Vertical roller conveyor machine
  • Tumbling barrel
  • Sizing screen (shaker)
  • Movable screen
  • Installation for the curb forming plates
• Specialized food-processing equipment
  • Four-pan oilseed roaster with capacity of 40 tpd
  • Shrink wrap packaging machine
  • Dough rolling machine
  • Tank container for transportation of syrup
  • Warmed «Bread van»
  • Warm body of the van for the transport of bread on the chassis of the vehicle Mercedes Sprinter 313
  • Warm body of the van for the transport of bread on the chassis of the vehicle GAZ 3302
  • Insulated 4-door «Bread van» 120 trays!
  • Warm body of the van for the transport of bread on the chassis of the vehicle GAZ 3302
  • 4-door (96 cases) Refrigerated Van on the chassis of the vehicle GAZ 3302
  • New modified arrangement of 5-door insulated Bakery Delivery Van based on Mercedes Sprinter 313 light truck frame
  • Insulated Bakery Delivery Van based on Mercedes Sprinter 313 light truck frame
  • Хлебный фургон на базе шасси автомобиля Mercedes Sprinter 313
  • Warm body of the van for the transport of bread on the chassis of the vehicle GAZ 3302
  • Kiosks for coffee and other drinks
  • 4-door Bakery Delivery Van with holding capacity of 96 bakery cases
  • Insulated Bakery Delivery Van with holding capacity of 120 bakery cases (4-door box) based on GAZ 3302 light truck frame
  • 4-door Bakery Delivery Van with holding capacity of 96 bakery cases, based on GAZ 3302 light truck frame
  • 4-door Bakery Delivery Van with holding capacity of 96 bakery cases
  • Two units of 4-door Bakery Delivery Van
  • 4-х дверный хлебный фургон вместимостью 96 лотков на базе шасси автомобиля ГАЗ 3302
  • 4-door bread isothermal van on the chassis of the car "Mercedes - Benz Sprinter 313"
  • 4-door insulated bread van (96 trays) on the chassis of GAZ-3309
  • Metal indoor tipper body (container-grain) under the vehicle's chassis KAMAZ for transportation of grain products and other bulk products
  • 4-door bread isothermal van on 96 trays on the chassis of the car "GAZ 3302"
  • Isothermal bread van for 96 trays on the chassis of the GAZ 3302
  • 4-door bread isothermal van on 96 trays on the chassis of GAZ 3302
  • A machine for brewing hops
  • 4-door bread isothermal van on 96 trays on the chassis of the car "GAZ 3302"
  • 4-door bread isothermal van on 96 trays on the chassis of the car "GAZ 3302"
  • 4-х дверный изотермический хлебный фургон на 96 лотков на шасси автомобиля ГАЗ 3302
  • 4-х дверный изотермический хлебный фургон (на 120 лотков) на шасси автомобиля ГАЗ 3302
  • 4-х дверный изотермический хлебный фургон на 96 лотков, на шасси автомобиля ГАЗ 3302
  • "Пароувлажнители" для увлажнения теста при выпечке хлебобулочных изделий
  • 4-х дверный изотермический хлебный фургон на 96 лотков на шасси автомобиля ГАЗ 3302
  • 4-х дверный, изотермический хлебный фургон, на 96 лотков, на шасси автомобиля ГАЗ 3302
  • 5-ти дверный изотермический хлебный фургон на 120 лотков на шасси автомобиля Mercedes Sprinter 313
  • 4-х дверный изотермический хлебный фургон на 96 лотков на автошасси ГАЗ 3302
  • 5-ти дверный изотермический хлебный фургон на 120 лотков на автошасси Mercedes Sprinter 313
  • 4-х дверный хлебный фургон вместимостью 96 лотков на шасси автомобиля ГАЗ 3302 (Газель)
  • Изотермический хлебный фургон (4-х дверный, на 120 лотков) на шасси автомобиля ГАЗ 3302
• Equipment for manufacture and repair of railway wagons
  • Freight wagon center sill stamping machine
  • Freight wagon center plate stamping machine
  • Hydraulic machine for flap hatches stamping
  • Fixture for assembly/weld of freight wagon side frame
  • Tilting device for open wagon frame
  • Open wagon door straightening jig
  • Draft gear assembly and dismantling bench
  • Open wagon sides straightening frame
  • Dolly for draft gear removal
  • Open wagon frame assembly/weld fixture
  • Testing bench for tank wagon check valve (NEW!)
  • Open wagon body assembly stand (NEW!)
  • Fixtures
  • Jig for cross-bearer girder assembly
  • Axle equipment assembly jig
  • Axle equipment assembly jig
  • Trolley for Dismantling of Rail Car Cushioning Devices
  • Fixture for machining of automatic coupler pins
  • Fixture for machining edges of the roller opening within rail car automatic coupler elevator system
  • Приспособление для обработки кромок отверстия валика подъемника корпуса автосцепки
  • Stand mounting and installing dismantling axle unit
  • A device for treatment of a stud of the housing coupler. A device for processing edges of the hole of the cushion lift housing coupler
  • Press upgrade cold overmolding PHN-1
  • Автомат шлифовки роликов ЮПТМ 294.00.000
• Aviation equipment and aircraft parts
  • Components of lifting mechanism for aerial refueling unit
  • Engine strut fuel supply lines
  • Aerial refueling unit installation gear (NEW!)
  • Name of equipment
  • Computerized bench testing unit for electrical centrifugal pumps
  • Computerized bench for testing in-tank pump units (NEW!!)
  • Bench testing unit for fuel pumps
  • Heavy equipment transportation dolly
  • The pipe (Cone) fuel drive UPAZ
  • Container for removable equipment
  • The pipe (Cone) fuel drive UPAZ
  • Монтажный комплект УПАЗ
  • Гидравлическая авиационная стремянка 4Н9912-ОМ
• Equipment for agriculture
  • Double-sided feeder with feed wetting
  • Automatic feeder with wetting system
  • Controlled Pig Feed Trough
  • Feed mixer
  • Pig Farrowing Pen
  • Piglet Nursery Store
  • Hydrants watering DP 56.000
  • Партия гидрантов в сборе ДП 56.000, колен присоединительных, патрубков с фланцем
  • Double-sided Optimized Adjustable Stock feeders with Stainless Steel Trough
  • Auger Conveyor
  • Pigsty Feed Rationer Mechanisms
  • Upgraded adjustable double-sided trough, with the trough stainless steel
  • Система гидроочистки воздуха
  • Партия Гидрантов поливочных ДП 56.000
  • Партия Гидрантов поливочных ДП 56.000 и колен присоединительных
  • Партия Гидрантов поливочных ДП 56.000
• Engineering and process equipment
  • Tilting table
  • Roller conveyor machine with tilting device for metal shapes feed
  • Vertical roller conveyor machine
  • Tumbling barrel
  • Sizing screen (shaker) (NEW!)
  • Movable screen (NEW!)
  • Installation for the curb forming plates
• Lifting mechanisms
  • Overhaul repair of overhead traveling crane КМ-5000, capacity: 50/10 ton
  • Repair of 80 ton Flamingo portal jib crane boom mechanism.
  • Heavy equipment transportation dolly
  • Capture for lifting wagons
  • Grip for transport trolley
  • Capital repair of bridge crane 35/5
  • Universal lifting traverse
  • Extension push bar for trays
• Steel structures (NEW!)
  • Metal framework of LED panel screen
  • Fire escape staircase metal structure
  • Aspiration system for tableblast machine
  • Rack 3-tiered storage shtantsform
  • Conveyor roller
  • «Boxes» for storage and travel packaging
  • «Equalizer» for stacking of packaging and corrugated packaging
  • Trays for storage shtantsform
  • Trolley for transportation of fuels and lubricants
  • Flume to remove getrootnode of automatic line
  • Table for restoration of Cutting Blades for Stamp-Out Dies
  • Aligner for leveling stacks of corrugated packaging
  • Capacity wash
  • The potbelly stove
  • Drum washing trough, stainless steel
  • Cut form washing table
  • Rail car unloading trolley
  • Trolley with Stainless Steel Containers designed for transportation of glue
  • Container mobile
  • Mobile module (metal) "Lodge" for accommodation of protection or staff
  • Containers for waste, self tipping with cover
  • Add-2nd floor for installation of the racks
  • Overpass to service road tankers for transporting oil
  • The mobile module (metal) "Lodge" for accommodation of protection or other staff
  • Table sealing machine
  • 2nd stage add-ins 2nd floor for installation of the racks
  • The party of "self tipping container with lock"
  • "Тележка для брака" и ряд других запасных частей
• Dies and die tooling (NEW!)
  • Blanking dies
  • Bending dies
  • Pressure casting molds for highdensity polyethylene
  • Die sets for manufacture of 4 mm steel hinges
  • The press-form for manufacturing rubber products
  • The party press moulds for manufacturing of rubber products
• Transport systems and mechanisms (NEW!)
  • Screw conveyor, capacity 120 tph, length: 30 m
  • Modernisation of conveyors of the station of unloading of carriages
  • Mobile belt conveyor for unloading bulk products
  • Mobile hopper with slide gate device for loading belt conveyor
  • Vertical Feed Mixer Auger
  • Repair conveyor belt mobile, «Simon»
  • Конвейер ленточный передвижной "Симон"
  • Емкость металлическая для зерновых материалов
  • Шнек передвижной
• Services
  • Overhaul repair of «Horizontal Boring Mill, Model 2620»
• Isothermal bread vans

• 16 May 2018

  Изготовлен и смонтирован на автошасси ГАЗ 3302 4-х дверный изотермический хлебный фургон на 120 лотков

  Для ООО "Хард Фор", г. Киев изготовлен и смонтирован на шасси автомобиля ГАЗ 3302 4-х дверный изотермический хлебный фургон на 120 лотков.

Products

• 
  Specialized and custom industrial equipment
• 
  Equipment for manufacture and repair of railway wagons